Product Details:
Minimum Order Quantity | 1 Piece |
Machine Type | RCC PIPE MOLD |
Automation Grade | Semi automatic |
Operation Mode | SEMI AUTO |
Trademark | YES |
I Deal In | New Only |
Type | HORIZONTAL |
Diameter | AS PER IS:458 |
Hardness | AS PER IS:458 |
Length | AS PER IS:458 |
Raw Material | MS |
Application | TO MAKE RCC PIPES |
Country of Origin | Made in India |
• At SAI, to meet the various needs of our clients, we provide a comprehensive selection of RCC Pipe Moulds.
• Outfitted with a modern infrastructure we make high-quality moulds with STEEL RINGS utilising the highest quality raw materials and cutting-edge technologies that are both robust and low-maintenance and we provide a broad range of RCC Pipe Mould to satisfy the demands of our customers.
Description
· Plane ending Flush joint, Male-Female joint, Spigot & Socket joint types are all available.
· MS Sheet/Plate, Angle/Flat, Tie-Rods, Nut-Bolts, and MS Fabricated Rings are all included in the moulds.
· All moulds are made according to Indian Standard.
· There are two lengths available: 2 meter & 2.5-meter length is available as per IS 458 & Customer Requirement
(Note: Rings can be made from M.S. Casting - Not Fabricated)
Additional Information:
Product Details:
Material | MS |
Brand | SAI |
Hardness | 20-60 HRC |
Length | 2-2.5m |
Surface Finishing | Color Coated |
Shape | Round |
The Reinforced cage is first prepared on the collapsible reinforcing machine by hand process. The cage is then placed inside the pipe mould, which is then hoisted up and mounted horizontally on the Runner machine. It is rotated by 'speed variater Machine. The rotation is kept slow in the beginning and then the speed is increased. The concrete mixture is prepared material by mixing cement stone, metal and sends respectively. The cement concrete is fed into the moulds during rotation, which spreads inside evenly. The time required for completion of this operation depends upon the diameter and class of the pipe. The pipes are kept mould for 24 hours. On the following day the pipes are removed from the moulds and submersed in water in the curing tank for about 15-20 days depending upon the class of the pipe